ASICS Gt-2000, Men's Gt-2000 9

Product Information

Where a national standard transposing a harmonised European standard the reference for which has been published in the Official Journal of the European Communities covers the essential safety requirements laid down in Annex II, the installations and their infrastructure, subsystems and safety components of any installation constructed in accordance with the standard shall be presumed to comply with the relevant essential requirements. The manufacturer must undertake to discharge the obligations arising from the quality system as approved and to maintain it in an appropriate and efficient manner at a proper and efficient level. For the purposes of this Directive "cableway installations designed to carry persons" shall mean installations made up of several components, designed, manufactured, assembled and put into service with the object of carrying persons.

The entry and exit areas of the installation must be designed so as to guarantee the safety of the traffic of vehicles, towing devices and persons. The movement of vehicles and towing devices in the stations must be capable of taking place without risk to persons, taking into account their possible active collaboration to their movement.conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc., If for reasons of operational safety an operator is required on board the vehicle, the vehicle must be fitted with the equipment required for him to carry out his tasks.

The manufacturer or his authorised representative resident within the Community must keep a copy of the declaration of conformity for a period ending at least 30 years after the last component has been manufactured.

Fei Wang

In their contractual documents, main contractors lay down, by reference to European specifications, the characteristics which manufacturers are under a contractual obligation to observe, particularly for safety components. In these circumstances, the conformity of the components is linked principally to their field of use and not solely to free movement on the Community market. The manufacturer must, for a period ending at least 30 years after the last component has been manufactured, keep at the disposal of the national authorities: The drive system of an installation must be of a suitable performance and capability, adapted to the various operating systems and modes. It must notify its decision to the manufacturer. The notification shall contain the conclusions of the examination and the reasoned assessment decision. The manufacturer must lodge an application for assessment of his quality system with a notified body.

The EC procedure for examining subsystems shall be carried out at the request of the manufacturer or his authorised representative established in the Community or, in their absence, any natural or legal person who places the subsystem in question on the market, by the notified body referred to in Article 16 which the manufacturer or his authorised representative or the abovementioned person appointed for that purpose. The EC declaration of conformity shall be drawn up by the manufacturer or his authorised representative or the abovementioned person on the basis of the EC examination in accordance with Annex VII.safety component" shall mean any basic component, set of components, subassembly or complete assembly of equipment and any device incorporated in the installation for the purpose of ensuring a safety function and identified by the safety analysis, the failure of which endangers the safety or health of persons, be they users, operating personnel or third parties, This module describes the procedure whereby the manufacturer ensures and declares that the component concerned, which has been issued with the certificate referred to in point 2, conforms to the requirements of this Directive that apply to it. The manufacturer or his authorised representative established within the Community must affix the CE marking to the component and must draw up a declaration of conformity. Member States shall take all necessary measures to ensure that subsystems within the meaning of Annex I are placed on the market only if they permit the construction of installations complying with the essential requirements referred to in Article 3(1).

must examine the technical documentation, verify that the type has been manufactured in conformity with the technical documentation and identify the components which have been designed in accordance with the relevant provisions of the European specifications referred to in Article 2(2) of this Directive as well as those which have been designed without applying the relevant provisions of those European specifications; the quality records, such as inspection reports and test data, calibration data, qualification reports of the personnel concerned, etc. define and implement all necessary measures to protect against risks which cannot be eliminated by the design and construction features, The manufacturer or his authorised representative must keep the notified body that has approved the quality system informed of any intended updating of the quality system. The lime zest logos are a highlight that grabs your attention. My only colorway suggestion I would make is to have the midsole be white all the way from heel to toe instead of blue halfway through.

INTRODUCTION

are put into service only if they permit the construction of installations which are not liable to endanger the health or safety of persons or, where applicable, the safety of property when properly installed and maintained and used for their intended purpose.