3/4” Female x 1/2” Male BSP Brass Round Pipe Connection, Reducer, Adaptor

Product Information

The size of push fit waste fittings is based on the nominal inside bore of the pipe they are used with. From fully fitted customised cleaning trailers and vehicles, Pumps and carbon fibre telescopic waterfed poles, accessories and parts. You can obtain a seal using PTFE< but you would be better off with a running nipple and keeping the thread forms consistent.

General purpose fittings with parallel male threads will generally have flanges to accommodate a sealing washer that can be compressed the effect a seal when the fitting is screwed fully home.I’m not totally sure what you mean by a male/male nipple, but in general the point is to look and see how the seal is achieved. This particular product is perfect for situations where you need to downsize your pipe connection without compromising on quality or durability. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

An example of this is the 3/8" Female x Male BSP x NPT Connector Thread Adaptor UK Thread to American, which provides a seamless transition between these two thread types.

We aim to dispatch all carrier delivered items within 48hrs, and all items delivered on our own transport within 5 days, Monday to Friday. It integrates fully into the 3/4 inch female couplings, allowing you to reduce the size of your couplings without using additional pipe.

Coal gas was supplied at a lower pressure downstream of the meter than natural gas is today, so I guess it might have been satisfactory. Mind you, its electrical section shows how to install a 2A or 5A socket as an extension from a 15A socket rather than providing it with its own 5A fuse, something that as far as I know has never been allowed under the electricity regulations. Our waste pipe and fittings are compatible with most push fit systems such as Hunter, Polypipe and Bartol (will not fit solvent weld pipework). With a smear of compound applied to the inside of the female thread and a smear applied to the end of the male thread , you can be sure that compound will be present over the entire surfaces of the mated threads of the two parts.

Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). Once I started using these products I have never gone back to PTFE tape as I find the liquid sealants to be very reliable and effective. that dad, a gasworks pipe fitter, used to use in the 1960's) that use meths as a solvent, are generally non-setting and should be removable after a couple of decades without difficulty.