CND Plexigel Builder 15 ml

Product Information

Flash Cure means to partially cure the gel for 2-3 ‘flashes’ in the CND™LED Lamp for client comfort and product control. Using the CND™ LED Lamp with button 1 for 2-3 pulses will reduce the output by 50%, which will control the heat sensation. Once the gel is applied to entire hand, cure for one minute using present button 2B for complete cure. Leave your wraps on for 20 minutes, giving them a squeeze roughly half-way through to re-inject the remover onto the enhancement. Don’t remove the wraps all in one, remove one nail at a time, otherwise the product may harden. You can use the line of light to help guide you on whether you have all the product off. When performing a rebalance, remember Bonder is only applied to the natural nail – anywhere that you can see the natural nail, then apply. If there is any lifting, this should be removed first.

For clear enhancements, and best results it is recommend to finish using CND™ PLEXIGEL Protector Top Coat. If using CND™ SHELLAC™ Gel Polish over CND™ PLEXIGEL, finish with CND™ SHELLAC™ Original(or DURAFORCE™Top Coat ) instead of Protector Top Coat. No. To guarantee the longevity of a CND™ PLEXIGEL service, CND™ PLEXIGEL Bonder must be used to anchor the enhancement to the nail and act as an attraction layer during sculpting.

The first step to deciding if you should do a rebalance or removal of CND™ PLEXIGEL, is to assess the nail. The good thing about CND™ PLEXIGEL is that it’s clear. It allows you to keep an eye on the integrity of the natural nail and to make sure everything is healthy underneath. If you are experiencing any lifting from CND™ PLEXIGEL this could be down to your prep. CND™ PLEXIGEL is a gel enhancement system that requires P.R.E.P for proper adhesion. Light shine removal is needed using a 240-grit buffer or medium enhancement E-file bit. P-Preform a manicure R-Remove shine E-Eliminate surface contaminants P-Purify nail plate layers If using CND™ SHELLAC™ Gel Polish, skip Protector Top Coat and CND™ SHELLAC™ Base Coat and apply 2 layers of CND™ SHELLAC™ Color. Cure each layer for one minute in the CND™ LED Lamp using preset button 2S. Finish with a layer of CND™ SHELLAC™ Top Coat and cure using preset button 3. When working with Builder, you will need more product to maintain enough structure to support the additional length of the enhancement As with Shaper, use the same floating application technique, keeping it slow and steady. CND™ PLEXIGEL self-levels so it makes application extra easy.

T - Tight: Make sure you fold the wrap as tight as possible. Any gaps will allow the solvents to evaporate resulting in an ineffective removal. We recommend the CND™ LED Lampas top choice for proper curing. CND™ PLEXIGEL was calibrated to properly cure in both of our CND™ LED lamps (closed and open units). If another lamp is used, it might lead to under or over curing and could impact the wear results of the product. CND™ PLEXIGEL is designed for every professional skill level, depending on how you best describe your skills:Just remember that if builder is 10 in strength and durability then shaper is 6 or 7 so putting it underneath is just going to all apart .. I - In place: Get your wrap in place, under the natural nail with the fold of the wrap towards you.

x CND™ PLEXIGEL Bonder - A bonding agent that anchors CND™ PLEXIGEL to the natural nail for secure adhesion for 3+ week wear. CND™ will continue to still produce their alternative enhancement systems, giving a the professional a portfolio of products to cater for every client requirement: CND™ PLEXIGEL Shaper is a crystal-clear bottled gel enhancement that strengthens, smooths and shapes nails. Perfect for natural nail overlays and short length enhancing. Its crystal-clear formula is also excellent for nail art!When finish filing, consider if the apex is where you want it and if the end is tapered and thin enough as you would like. If you’re struggling with visually seeing if you have the correct structure, close your eyes and feel the nail, it’s a great way to determine an uneven surface. x CND™ PLEXIGEL Protector Top Coat - A clear, high-gloss, protective top coat designed to complete the final layer of Plexigel enhancements.

You can leave nails perfectly clear or finish with your favourite CND colour! The options are endless Formulated without the following 12 ingredients: Formaldehyde, Toulene, DBP, Formaldehyde Resin, Camphor, Xylene, Parabens, Ethyl Tosylamide, Triphenyl Phosphate (TPP), MIT, Animal Derived Ingredients & Gluten Availability: Available January 2021 as a salon service nationwide. Visit the Salon Locator on CND.com to find a CND PLEXIGEL® Brand Certified Pro near you. Remove 95% of CND™ PLEXIGEL with a file before, moving onto wrapping the enhancement that’s to be removed.Perform P.R.E.P. and apply CND™ PLEXIGEL Bonder to the natural nail. Cure for 10 seconds in the CND™ LED Lamp using preset button 1. CND™ PLEXIGEL is a monomer-rich formula and some clients may experience heat sensitivity. Reference the CND™ Custom Cure protocol blog post If the enhancement doesn’t require shaping or finishing, you can apply CND™ SHELLAC™ Gel Polish directly over the top film of the gel. you are going to love shaper because its a great fixer when your clients break or chip – and you can file down the damage to remove and get to the natural Nail and just apply bond and shpaer .. then file and continue with whatever . CND™ PLEXIGEL is a versatile & convenient bottled-builder gel system, that provides strength, length and shape, with No Pots. No Tubes, No Mixing, No Mess. Use alone for crystal clarity, or team with CND™ Shellac to provide flawless colour!