Door C - Pack of 10 Wooden Door Hangers Unpainted Shapes Blank Craft Arts Decoupage

Product Information

Once you're happy with your tape lines, make sure they are pressed firmly along your sign. Going with the grain, apply your white chalk paint. Once dry (after about an hour), I recommend a second coat for a more solid appearance. Also, remember that your door hanger doesn’t necessarily have to be placed on top of a door. It can just as easily be mounted on a wall. So put your hooks and hangers where you need them the most. Clothes hangers If you want to add a second paint color to your wood piece, you’ll also want some painter’s tape to get nice straight lines!

Some of our hangers can be used both indoors and outdoors if you would like to hang your clothes out to air and dry outside. For this you need a sturdy hanger that won’t lose its colour. NOTE: If you choose to add a second bow, you will want to reference your first bow and make it either slightly larger or slightly smaller so they compliment each other. If you are making the Welcome to our Home or Ho Ho Ho Welcome sign, you need to paint your stripe next. APPLY POLYCRYLIC: I recommend allowing your sign to dry overnight before applying the Polycrylic. Once your paint is completely dry, use your bristle paint brush to apply water-based Polycrylic to your sign. Apply generously to prevent streaking in the finish. Always make sure to apply Polycrylic in a well ventilated area and either use gloves or wash your hands thoroughly when finished. Allow a minimum of 12 hours, but preferably 24 hours to let the Polycrylic dry.A method to cut your vinyl – I used the amazing Cricut Maker but you can also use the Cricut Explore This monogram comes from the Bogi Split Monogram Font! That font contains every letter of the alphabet as a split monogram. And to top your wood round off, add a bow and/or some artificial leaves to the top of the circle — it’s totally your choice! Get creative!

Lastly, you can use a hairdryer to heat the vinyl and then burnish the bubble area. Be careful not to melt your vinyl! Take a baby wipe and fold it in fourths. Dab a small amount of brown acrylic paint onto the wipe. Rub the paint into the wood sign until you reach your desired shade. Once the paint has dried (about 10 minutes), you can repeat the process if you decide you'd like a darker brown.

Shoe Racks

I just love how my DIY door hangers turned out — not only do they look great on a front door, but you can use them to decorate bedroom doors or kitchen walls, too! Are you wondering if you need to apply a sealer over your vinyl? If you've prepped your sign like I did and used permanent vinyl, you do not need to seal your sign. I've had wooden signs last outdoors for years with this method! STEP 4: APPLY YOUR HANGER AND RIBBON Use your scraper tool to burnish your vinyl to the sign. Gently peel away your transfer tape. Have your scraper handy to reburnish any areas that may lift as you remove the transfer tape. My DIY Door Hanger designs start with an unfinished wood circle— you can get these in a variety of sizes, but I think a 12 inch wood round works best for most front doors. If you can find your wood circles with pre-drilled holes and twine, even better. And that’s how the ones I used come (see materials below for source). Having the wood rounds pre-drilled and hung in advance makes this project so much easier. Feel free to drill and hang your own, of course! Do you dream of clutter free floors? Enjoy an opportunity to flaunt your personal style? With the right wall hooks, you can achieve two in one. Get your clothes, bathrobes and towels off the floor and out of stuffed drawers or cupboards with our wide selection of hooks and hangers.