Colron Refined Wood Dye 250ml Georgian Medium Oak

Product Information

Different types of wood produce different results. The colour example on the photos may not be a true representation of the actual colour as different woods will produce different shades. Depending on the type and age of new wood, resinous areas and wood knots may require treating prior to staining and finishing.

Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Red is a strong colour to have to bring down in tone and you can often end up with a more pink or orange appearance if you are not careful. And if can be difficult to know what the right solution is for this, it could just be a case of test areas to see what the results are. Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. Next Day & Named Day Delivery This dye is mainly used on unsealed bare woods. If stripping of a previous finish is required, see our helpful guide here. Liberon Fine Wood Stripper with Steel wool, is ideal for this.of the reach of children. Keep away from sources if ignition – No smoking. Do not empty into drains. If you wish to return your item to Robert Dyas, you can do so by one of the following methods: 1. Request a Collection via Robert Dyas Customer Services When you are happy with the colour you can finish with a water based varnish, French polish, wax or oil.

You will not get an exact match there are too many variables with woods for that however if you take a look at the colour swatches, rather than the names of those colours, you could get close. The reason I advice this is often a ‘Light Oak’, for example in one range can look very different in appearance to the ‘Light Oak’ in another range. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out Wood knots and other resinous areas should be wiped with Methylated Spirit to remove any surface resin Colour matching one wood type to another in a room is question we get asked about quite a lot. You could start by looking at a tinted oil to apply to your doors, this adds colour and protection to the wood and can bring it closer to the floor colour. Fill any holes, splits or gaps with a Wood Filler or smaller chips with a wax filler. Make sure all the wood has been correctly sanded to a smooth finish and dust.

How to use Liberon Spirit Wood Dye

Ensure that all previous paints and varnishes are fully removed by sanding or with a suitable varnish and paint stripper, before oiling Our first average we look at for Colron Refined Georgian medium oak Matt Beeswax 0.4L is to judge it against other products from the same brand, in this case it’s Colron. This tells us that there are a total of 53 Colron products at B & Q. Oily hardwoods such as teak, resinous areas and knots should be thoroughly washed with white spirit with hundreds of Pine species, all will give a different final tone to the colour in one way or another. This can be an issue with old floors where the majority of the boards are original but some have been replaced over the years. The replaced boards will react differently with the applied finish and will probably give a different look to the original boards when coloured, even if they are the same species. The difference in colour can usually be made less obvious but may take some experimentation and testing to get it right. What’s the solution? Apply one moderate coat of Liberon Spirit Wood Dye with a lint-free cloth in the direction of the grain of the wood and then allow to fully dry. More coats can be applied to darken the wood but ensure it is full dry between coats.

For some people the walnut looks like mahogany and the mahogany like a cherry. The variations from brand to brand are endless, the only way to tell for sure what the result will be is to try it on your wood. The wood type, age and condition will all impact on the result and this is why we so strongly recommend test areas here at Wood Finishes Direct.Thank you for getting in touch with your enquiry. There are not many coloured varnishes on the market, because a better result is nearly always achieved by using a stain to give colour and then a clear varnish to seal and protect. There are a few exceptions to this, white for example, because a clear product over white will nearly always yellow.

With so many factors to take into account when choosing a colour for a wood finishing project, our advice is to always do a test area first on the actual wood to be stained and finished. If you find that the colour is either too light or too dark on the test patch, there are probably things that can be done to fine-tune the final colour. For example, a water-based stain can be diluted with water to lighten the shade. This is by far better than completing a major project to then be faced with the prospect of having to sand it all off and start again. Need more help with Oak? Need help with your oak project? Ensure sure you have sufficient dye to finish the work. Do not mix spirit based dyes with water based dyes or white spirit based dyes. Application of a second coat may lift the first coat. Caution must be taken when using oil based finishes over Liberon Spirit Wood Dye. However, we then like to go a little deeper to explore more detail about the product by looking at products in the same category as Colron Refined Georgian medium oak Matt Beeswax 0.4L. That then tells us that there are 4480 products in the Painting & Decorating category at B & Q. Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets We love to see before, during and after photos of any wood finishing project. If you would like to share your project pictures with us and our followers, you can either send us some photos or share on our