Bona R848 15kg Silane Based Wooden Flooring Adhesive 15kg

Product Information

Mosaic parquet or any other similar solid parquet: approximately 900 g/m², Bona Trowel 850 G or 850 F For full application and coverage details, please refer to the 'Technical Information' Datasheet link above. Remove all existing traces of adhesive residue, paint, concrete curing compounds or other contaminants that may affect the adhesive bond Pallmann P4 adhesive is also eco-friendly, containing no solvents or isocyanates... This makes it safe for both the installer and the environment. In terms of eco-friendliness, both adhesives are safe for the environment. However, Pallmann P4 adhesive is a better choice for you if your customers are looking for a completely solvent-free adhesive. Which should you choose?

Bona R848 adhesive is also VOC compliant, which means it contains low levels of volatile organic compounds. This makes it safe for both the installer and the environment. Here at Ultimate Floor Care, we sell this product in the following ways: Goods supplied incorrectly entirely through the Company’s fault will be re-supplied at no cost to the Customer. The surface should also be slightly textured. If applicable, it must meet the requirements of local standards or codes of practice. If necessary it should be professionally prepared for laying. A primer is typically not needed. If the sub floor is problematic the use of a primer like Bona D501 Bona R848 adhesive 15kg is an elastic one-component silane-based adhesive with excellent rib stability for the installation of engineered or solid wood floors (solid wood floors up to 190 mm wide boards).As a water and solvent-free adhesive, Bona R848 causes nearly no swelling of the wood once it has been installed.

Bona R848 adhesive is a one-component, moisture-curing adhesive. They designed this product specifically for wood flooring installation. This adhesive is suitable for all types of wood flooring, and you can use it on both concrete and wood subfloors. layered pre-finished parquet, boards and solid wood planks (max. 22 x 120 mm): approximately 1350 g/m², Bona Trowel 1250 F or 1250 G When using Bona R848, the use of a primer is generally not necessary if the subfloor and conditions are suitable - if you're unsure, our Technical Team will be able to advise. Pallmann P4 adhesive is a one-component, water-based adhesive. They designed this product specifically for wood flooring installation. This adhesive is ideal for engineered solid wood floors; you can use it on concrete and wood subfloors. You can also use it on plywood, calcium sulphate screed, cementitious screed, and concrete. Spread adhesive on the substrate while holding the Bona trowel at a 90° angle, using a smooth semi-circular motionWhen it comes to comparing Pallmann P4 adhesive and Bona R848 adhesive, there are a few key differences to consider. Pallmann P4 adhesive is a water-based adhesive, while Bona R848 adhesive is a moisture-curing adhesive. This means Pallmann P4 adhesive cures faster and is easier to work with. At the same time, Bona R848 adhesive provides a stronger bond but takes longer to cure. Sandblasting, shot blasting or scarifying may be necessary to completely remove some of these residues Disposal: wastes and emptied container/tubular bags, should be handled in accordance to local regulations. Do not allow more than 30 minutes of open time before firmly setting flooring into the adhesive. Higher humidity can decrease open time Looking for a stronger adhesive for wider engineered flooring? Try Bona Quantum, or for ultimate strength, see Bona Titan.