Napier Airgun Pull Through Kit

Product Information

Napier's Airgun Pull Through Kit contains everything you need to effectively clean any type of air rifle, and is suitable for .22, .20, .25 and .177 calibres. The loop and shaft of the pull-through must be inserted from the muzzle end. Cleaning patches are secured in the loop when it pops out at the breech, and are then pulled smoothly and firmly down the bore from breech to muzzle. Of course, using the right materials is crucial. That's why Air Arms trusts only Napier gun care products for their air rifles. With a focus on quality and performance, Napier products are designed to keep your air rifle in perfect shape, so you can focus on nailing your shot. Tagged with: airgun barrel, airgun shooter, airgun shooting, airguns, gun barrel, gun cleaning, how to, pcp, PCP barrel cleaning

Napier Pull-Thru Cleaning Kit - Airguns of Arizona Napier Pull-Thru Cleaning Kit - Airguns of Arizona

From a recognised air-rifle kit brand like Napier of London, you can be sure of only the highest quality. Includes: Carry kit Instructions and component case Watch our video on How to clean an air rifle and How to clean an air rifle barrel With the Napier Pull through tool and easy-to-follow instructions, you'll have everything you need to get your air rifle clean and functioning at its best. Plus, the kit comes with a convenient component case, making it easy to store and transport. Perfect Choice for Airgun Enthusiasts They are dangerous, as although they are very light and come to a complete stop within 15 yards or so, they are still capable of causing damage, so always ensure they are shot in a safe direction.

Napier Pull Through Air Rifle Cleaning Kit

While plenty of people will clean their airguns with a rod, two things really do go against this method. Rods are supposed to be used with something called a bore guide which keeps the rod central to the bore as it travels down the barrel. Bore guides are intended to be used with powder-burners where the bolt can be removed and the bore guide inserted in its place. Looking to keep your Air rifle in top shape? We've got you covered with this simple cleaning guide that will have your Air rifle looking like new in no time! A secondary benefit of bore paste is its deep cleaning ability, and some shooters like to use it as an occasional cleaning product in addition to its intended use of prepping a new bore. Bore paste is meant to be applied to either a patch or brush, and rodded down a barrel. As an air rifle owner, you know that accuracy and consistency are key to a great shooting experience. But did you know that every time you fire your air rifle, lead deposits on the rifling lands? Over time, this can cause your accuracy to suffer - not to mention the risk of corrosion.

Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot Gun Cleaning Kits | Gun Maintenance Accessories | Airgun Depot

Some snakes have phosphor bronze bristles embedded in the body for extra cleaning power, and as long as you pull the snake concentrically they won’t do your bore or O-rings any harm. Once the pull-through loop is in place, consult your instruction manual to determine how many patches you'll need for your calibre. Attach the patches to the loop and pull through the air rifle, examining the patches for fouling. Repeat until they come out clean. US firm KG Industries makes some fairly high-tech gun care products, one of which is KG2 Bore Polish. Of all the bore pastes I’ve ever used, this is probably the most gentle, lending itself to repeat applications.Felt cleaning pellets are the simplest of all the bore cleaning methods, with a cleaning pellet being inserted into the breech and being fired as normal. Take six or so pellets and soak three with some sort of solution, such as Napier Power Pellet Lube, but leave the remaining three dry and shoot these last. I decided to put my money where my mouth is and try it in a number of my own air rifles, but using a pull-through rather than a rod. When using any type of liquid near the breech of an airgun, less is definitely more, and I was careful to use a minimal amount with each pass of the patch. The BoreSnake, developed by US firm Hoppe’s, is similar to the traditional pull-through, but instead of using disposable patches, it’s the body of the snake itself that carries out the cleaning. Many shooters will tell you that they never clean the barrels of their airguns – and that goes for a lot of rimfire shooters too. As a lead projectile is fired down the bore, be it a pellet, slug or bullet, it will deposit a thin layer of lead over the lands and grooves of the rifling.

Napier Pull Through Air Rifle Cleaning Kit | Wolfman

Patches: These pre-cut patches are also from Napier – just layer different numbers of patches according to the calibre of the gun you’re cleaning, and don’t forget some pistol barrels can be cleaned this way as well. Did these guns shoot any better afterwards? To be perfectly honest, no, not really, but then they were shooting well to start with. In one case I actually thought I had done more harm than good as it took an incredible 62 shots to re-lead the barrel and get it shooting well again. Soak a few cleaning pellets with a drop of Napier Power Pellet Lube, but finish off with some dry ones to help the bore lead-up more easily Pull-through: This pull-through from Napier has been given a bore-friendly coating that won’t harm the rifling. The big advantage of a pull-through is the fact that you’re cleaning the barrel in the direction of travel of the pellet.Tagged with: .22, air rifle, airguns, ammo, bore, bore paste, brushes, centrefire, fac, guns, mike morton, muzzle, pcp, pellet, rifle, rimfire, rods, shooters, shooting, technique You can tell how dirty the barrel has become by looking at the accumulated lead that’s been removed from the lands and grooves of the barrel A brush can be attached to the rod to agitate deposits in the bore. Traditionalbristles are made of phosphor bronze, an alloy of copper, but many shooters prefer to use brushes with nylon bristles, which are less likely to cause any damage. If you need a catch-all cleaning solution for your air rifles then this is it. The pull-through will work with PCPs, springers and gas-rams, and the pull-through won’t care if your gun has a fixed barrel or is a break-barrel.

pull through kit for cleaning a pellet gun How to make a pull through kit for cleaning a pellet gun

So why wait? Keep your air rifle in top shape with Napier's pull-through kit and enjoy a smooth, accurate shot every time. Your air rifle (and your aim) will thank you! As the pellets are fired down the bore, they will gently scrub away at the exposed lead in the rifling, with the non-lubed pellets drying out the bore ready for the next proper shot. Feed the pull-through carefully down the barrel, taking care not to scratch the lands: even though brass is softer than steel, it can still do some damage if it’s not used correctlyNapier’s airgun pull through cleaning kit contains everything you require to effectively clean most types of air rifles, and is suitable for .22 or .177 calibres.