Plasti Dip Plastic/Rubber Paint - 750ml (White)

Product Information

Just about any car component can be Plasti Dipped, barring those that generate a lot of heat, like exhaust pipes. I have been in the decorating trade for over 25 years and have never come across a paint so versatile as Plasti Dip with exceptional adhesion. Plasti Dip protective coating has excellent resistance to acids, alkaline, and most common household chemicals.

Performix Plasti Dip, Aerosol, White, 311 gram | The Home Performix Plasti Dip, Aerosol, White, 311 gram | The Home

Proceed by extending the mask with paper towels or newspaper so that you don’t accidentally spray thin coats of Dip on your car. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, or direct sunlight. The main concern when doing the wheels is to avoid spraying your calipers, rotors/drums, and other sensitive components located behind your wheel. Plasti Dip can be dipped, brush coated and sprayed (spraying requires the use of thinners (up to 50%, up to 10% for top coats (Enhancers).Yes, the Plasti Dip Enhancer in the Glossifier™ formulation provides a glossy finish on cured Plasti Dipped items.

Home Page - Plasti Dip

Maintain a distance of at least 15cm to 20cm between the nozzle and the surface, and move the can from side to side, allowing the contents to settle on the surface without concentrating them at one point. However, it’s very gratifying if you get it right on the first attempt, especially if you haven’t done this sort of thing before. If you let each coat dry before applying the next one, it will form a strong bond, and the result will stay intact for a really long time.Plasti Dip resists alkaline, acids, salts, moisture, abrasion, and most chemicals, and is an insulating dielectric coating. The main risk when it comes to using Plasti Dip on chrome is that it might peel off easily, considering how smooth chrome-finished surfaces are.

Plasti Dip - Aerosol Spray - 311g Plasti Dip - Aerosol Spray - 311g

Most items being dip coated do not require priming because the coating is shrinking around the item as it dries. Spray from 200mm and build up in 3 thin layers, allowing to dry between coats, the 3rd layer can be thicker.Then wipe down the clean surface tissues and rubbing alcohol or degreaser to make sure that there’s no residual oil or grease left. If so you will needa highquality cellulose thinners in a 1:1 ratio (unless it is our pre-mixed Plasti Dip).

Plasti Dip - The Home Depot Plasti Dip - The Home Depot

Resists moisture, temperature (-34°C to +93°C), alkaline, acids, salts, abrasion and most chemicals. NOTE: Surfaces that are non-absorbent such as metals should be primed using our recommended primers, which are available in clear and grey. In adulthood, Jason’s hobby grew into an obsession for creating custom car liveries, which eventually became his full-time occupation. The best part about using Plasti Dip is that it’s a less labor-intensive, and much cheaper than the cost of vinyl wrapping or a fresh paint job.Because Plasti Dip is a removable bond, feel free to spray directly onto the surface of the car around the emblem. Leather and Vinyl seats, Dashboards and Door cards, whatever your job ColorBond is easy to apply with startling results. The teams are looking to continue the heritage of Plasti Dip International, while bringing a new look and feel to the brand. The first coat should only be a light dusting, with enough transparency to be able to see the original surface.