76 Projects The Piggy

Product Information

They are industrial designers with over 40 years experience between them, they also love cycling and bikes of all types, n+1 is an equation that is familiar to us! Frustrated with floppy bags, worn paintwork and cafe stop faff 76 Projects sought to design a system, a strapless quick release system, for top tube bags/bento boxes/fuel pods. I’ve tried to put it in unconventional places to test it’s robustness and to see if it would rattle off but everywhere i’ve mounted it to it has stayed exactly where placed. Just be sure to keep the provided valve cap on during your rides to prevent the head of the valve core from falling off, as it does unthread all the way, whereas a typical Presta valve core head stops at the end of the thread and can't come off.

The innovative way of allowing greater volumes of air and sealant through the valve, providing enough gap for the micro sealing particles in tubeless sealant to pass through without getting stuck in the valves.You can replace it, but it's not 'removable' in the usual sense, because of the way it has to be pushed through the valve and out of the outside of the rim – it can't be removed while the tyre is seated. The Race mount does not have the replaceable insert or the ability to accept camera or light mounts.

Used Mavic Ksyrium, Hunt and Roval wheels, all with Conti 5000 TLs, hassle free and never let me down. This provides a forward-thinking solution to the annoyingly common problem of clogged-up tubeless valves. However, if you have the real estate, I would recommend adding the Micro Piggy to your setup as additional storage.

Have been using Milkit valves for a couple of years - mostly good but the plastic valve tube gets twisted/stuck often. This enabled us to quickly consider what was the most cost effective way to produce something in SLS via quantity, size and finish. Industrial designers with over 30 years experience between them, they're also avid cyclists with a passion for all cycling disciplines. The 3DPRINTUK costing algorithm is the best we have found on the market as it is geared not only to prototypes but also production quantities. printing also allowed us to enter the market with low financial risk, and continually fine tune the design.

In the real world the rider accounts for 60% of drag and the savings generated by wearing a aero helmet are soon lost if the rider needs to move their head to every time they view their computer.

However, we are always looking for new storage solutions for our adventure rigs, we decided to test the Micro Piggy through the lens of bikepacking. the zip and bag is made of hard wearing and waterproof material and despite many soakings, mud and jet washes it’s remained dry inside. cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works.

A 'no-turn' computer insert is now standard and can be easily configured to suit almost any set-up and extensions.The in-house industrial 3D printing capability and capacity will add value to the business with the control that it brings, but one single manufacturing process will never meet all of the company’s manufacturing requirements.