Heavy Duty Rewireable IEC C13 Female Inline Socket Plug 10A 250V for Refitting on Mains Cables

Product Information

Beginning with the IEC 60320-1:2015 edition, [5] this part also specifies interconnection couplers which enable the connection and disconnection of an appliance to a cord leading to another appliance, incorporating IEC 60320-2-2.

But the feather in your cap was the excellent service yesterday when at 4:25pm, despite believing the deliveries had already been picked up, your sales representative went and checked, just to make sure.Just a quick note to say THANK YOU for your help and advice and the unbelievable turnaround on the leads. Commonly referred to as a "kettle cord" or "kettle lead", [17] [18] but kettles in countries using 120V require the C15/C16. These IEC C13 to C14 extension leads are for use with IEC Class I appliances and are used in computer equipment for interconnecting and powering PCs and peripherals such as monitors and printers.

IEC mains plug to 3x 4mm plugs • Live (brown), neutral (blue) and earth (green) plugs • 300V CAT II rating • 1. Designed to mitigate the risk of downtime due to disconnection • Prevents disconnection of critical power caused by accidental removal or vibration • Suitable .For appliance couplers this consists of the letter "C" followed by a number, where the standard sheet for the appliance inlet is 1 higher than the sheet for the corresponding cable connector. The plug connector is the part integral with, or intended to be attached to, the cord, and the appliance outlet is the part integrated with or incorporated into the appliance or equipment or intended to be fixed to it, and from which the supply is obtained.

We will not deduct for removal of packaging to inspect the item, but we may deduct for wear and tear where the item has not been checked but used. Connectors are also classified according to the method of connecting the cord, either as rewirable connectors or non-rewirable connectors. They are identified by letters, not numbers, with one letter identifying the plug connector, and the alphabetical next letter identifying the mating appliance outlet.This power cord is terminated with a fully moulded IEC plug which is used to connect the power cord to an appliance which has an IEC C14 inlet. a Protection Class II connector cannot mate with a Class I inlet which requires an earth); whereas connecting a Class I connector to a Class II appliance inlet is possible because it creates no safety hazard. North American rating agencies ( CSA, NOM-ANCE, and UL) will certify IEC 60320 connectors for higher currents than are specified in the IEC standard itself. Cables with a C13 connector at one end and a type E plug connector at the other are commonly available.

This extension cord is fully equipped with an IEC C13 type connector on one end and an IEC C14 connector on the other. The power supply cord can be replaced easily if damaged, because it is a standardized part that can be unplugged and re-inserted. Thanks again for the excellent service - I will have no doubts about recommending you to anyone who needs leads in the future! Given the 120 V (±5%) mains supply used in the United States [14] and Canada, [15] these higher ratings permit devices with C6 and C8 inputs to draw more than 114 V × 2. Each fused socket has a neon light which indicates the status of the fuse, allowing easier replacement of any blown fuses.Different types of connector (distinguished by shape and size) are specified for different combinations of current, temperature and earthing requirements.