Drayton Wiser Smart Heating Room Thermostat

Product Information

From the home screen, you can also view the weather for your location and sunrise and sunset times, too. The cog icon at the top of the home screen provides access to the main Settings menu, from where you can activate smart modes such as Eco and Comfort, and set a temperature for the Away mode. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Digistat supports the following fuel types: The information provided in this document contains general descriptions, technical characteristics and/or recommendations related to products/solutions. You can tap on a room and edit the schedule or access the room settings, where you can view the battery level for the thermostat, rename it and turn Open Window Detection on or off. Editing a schedule was made super-easy as a result of the ‘copy’ feature, which lets you duplicate a schedule with just one tap, rather than having to input it all for each day and on each device.

day programming: The most flexible option allowing you to schedule every day of the week independently. We also found it was easy to create some basic automations in the app using the Moments feature - such as turning the radiators in the lounge on, while also dimming the map connected to the Wiser smart plug to create a cozy atmosphere of an evening. App The Digistat remembers the last BOOST so if you always use the same parameters just press the O button 3 times. Simple!

I have a Digistat+RF room unit with my combi boiler. Is it possible that interference from other wireless appliances can occur, ie computer systems, walkie talkies, radio controlled toys? I have a Digistat RF and I have managed to snap one of the clips on the battery holder. Where can I obtain a replacement My Digistat +2/3 appears to switch off before my set point is reached and sometimes remains on after my set point is reached, is this normal? The final component, the smart radiator thermostat, is a white plastic cylinder, which fit to the radiator once the existing valve has been unscrewed. To manually override any schedules you may have set, simply swivel the top of the radiator thermostat right to start the radiator heating, or left to stop heating. An LED on the radiator thermostat glows red temporarily when the radiator is heating, and blue if it's been turned off. Turning and holding the radiator thermostat will also reset or put it into set-up mode, depending upon how long you hold it in that position.

Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. I’m not sure about rating this as “amazing” (5 stars) but “better than expected” (4) didn’t seem a fit either..it’s a central heating thermostat..can’t we just give a star rating without these associated comments?? We manufacture two different types of sensor kits. One is described as a remote sensor and the other as a setting kit.

2. Scheduling is quicker and simpler

The RF1, 2 and 3 are no longer available. They can be replaced with any current range of RF thermostats. Hard Wired Room Thermostats Powered by two AA batteries, the smart thermostat can be freestanding on a table or shelf, or mounted on a wall. It has three touch controls on the front. The plus and minus button allow you to adjust the desired temperature of the room, while the middle button boosts the heating in said room by two degrees. The screen automatically goes to sleep after 15 seconds to conserve the battery, but pressing any of the three touch controls will wake it up. The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units.

I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical? The unit is simple to mount on the wall or there’s a stand, the batteries are easy to fit and it’s easy to add to the system like the other devices. No, The Digistat+2 has superior programming functions, which allow for greater temperature control. We did notice a slight delay of around 10 seconds to one minute between boosting the heating from both the radiator thermostat or the app and the boiler springing into action. The further away from the Heat Hub the thermostat is, the longer the delay. Initially, we also struggled to get the radiator thermostat in the room furthest from the Heat Hub to remain connected to the system at all times. It would often drop the signal, meaning we were unable to control it via the app. However, after installing an optional Wiser Smart Plug – which also doubles as a range extender for the system – in a room between the Heat Hub and the troublesome radiator thermostat, connection issues were no longer a problem. No, E1 is an error code that means the internal sensor has failed. The sender unit will have to be replaced.The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: I’ve not spent the time scouring my bills/data to find out how much this has saved, very hard to appreciate with the way things are bouncing around but I feel it must have helped not least because I have a pretty unique set up here, I have 3 rooms and a hall in my little flat and I rent two as tiny self contained spaces/short term holiday lets. Previously all the rooms had to follow a general trend: if I was in for the weekend and guests were out sight seeing etc as is typical I was heating their rooms also, if someone was cold at night, all the rooms had to be warmer. This system allows me to set each room up individually, I can say keep one space warmer at night, turn any of them off for most of the day, the boiler still runs keeping any warm that are occupied. It does it by shutting or opening battery controlled valves on the radiators in each as required. I think in a conventional sole occupant house this would not be as useful/this level of control would be excessive. day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend.