【Best Deals】OriGlam 5PCS Screw Extractor Easy Out Set Drill Bits, Guide Broken Damaged Bolt Remover Tools Kit Set 3-19mm

Product Information

They are generally left-handed, for use on right-handed threads, though there are right-handed extractors for removing left-handed screws. This step-by-step guide for the proper use of easy outs should benefit those faced with having to remove a broken, seized screw or bolt. If the easy out loses its metal-to-metal bite, remove the wrench and tap on it again with a ball peen hammer to re-seat it and then continue the attempts to turn it.

Using a center punch and a ball peen hammer, place the point of the center punch in the exact center of the broken bolt or screw and firmly tap the striking surface of the punch to score the top of the bolt or screw.Just place the drill bit into your drill, apply pressure to the drill screw extractor and then use in reverse just as you would with a normal screw.

ALL IN ONE SCREW EXTRACTOR SET - Our screw remover comes with 5 1/4" hex drill bits, each with a different sized end to ensure you have the right extraction tool for rounded screws or any size of the damaged screw you have a problem with. Straight fluted extractors may come in a kit that also has associated drills, drill bushings, and special nuts, or be sold individually. Insert the easy out into the hole drilled in the center of the broken bolt or screw and then gently tap it home with a hammer so it bites into the metal of the bolt or screw.This will aid in keeping a drill bit on center in the next step and can also help to dislodge rust from the threads. Where applicable, orient the troublesome screw or bolt so gravity aids the lubricant in soaking down to the threads. Each EASY-OUT has a right-hand thread which embeds itself into the hole drilled by a corresponding (matching) Right-Hand HSS Jobber Drill Bit (drill bits are not included). Screw extractors are intentionally made of hard, brittle steel, and, if too much torque is applied, can break off inside the screw that is being removed. Straight fluted extractors have less wedging effect than tapered screw extractors, so have less tendency to lock the screws into place.