Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

Product Information

The enclosure can be closed and the buildplate rotated slightly so that the drops falls of at a corner. There are now many 3D printer build surfaces: glass plates, PEI print beds and magnetic steel plates are just a few of the numerous options with which you can equip with your 3D printer.

No more spatula scraping and breaking prints from fragile materials (I am looking at you, Elegoo Standard! I have not needed to add the shim as the spring in the build plate can easily cater for the extra thickness. One thing I don’t like about it is the fact that I didn’t get the spacing quite right and it triggers my OCD.Stalo se, že pří tisku se plech posouval do jedné strany a tisky byly šikmé, dlouho jsem hledal odpověď proč se to děje a nakonec jsem dospěl k názoru že díky rozdělení ploch na jednu stranu, se folie odlepuje postupně z jedné strany na druhé a tak svislý tah Z je nerovnoměrný a plech se postupně posouvá do strany.

Váš nápad dat nedojmové magnety je asi lepší ale, protože uběhlo nějaký čas ptám se jestli funguje pořad dobře a nestane se vám že se při tisku posune? If, by chance, the print still sticks strong to the magnetic plate, it bends and you're left with a rounded bottom (top - depends on the point of view) surface of your print. Once levelled I put a Solov VAT on the printer added some resin and went to print, I ended up with a grinding noise, so removed the print end and releveled, did this a few times but kept getting the grinding noise, when looking the print bed had moved so it was tilting up at the front. Some mention that the magnetic part sticks well to the build plate, the adhesive is strong, and the backing sticks very well to it.I don't know if its needed or not but I do it on my FDM flex plate, but I roughed up / lightly scratched the surface in random directions with some wire wool that came with the FDM plate. Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. REMEBER you MUST relevel the bed following the manufacturers instructions for your individual printer, in some cases you may need to add a spacer for the Z axis sensor, in regards to the Elegoo Mars 2 the sensor is not needed, just make sure you loosen the nuts fully before leveling. I've been using this for over a week now and one thing I am noticing is that the metal sheet warps and lifts from the magnetic sheet.

Once you’ve finished printing, remove the stainless steel plate, flex the print off, and snap the Fula-Flex back onto the magnetic sheet! Vše fungovalo hezky dokud jsem nezačal tisknout velké kusy a navíc s různými plochami, větší plochy byly spíše do jedné strany (nešlo to rozdělit jinak). Fortunately, there are companies laser cutting an arbitrary shape out of them on laser or water cutter. One observation: my hypothesis I stated in a my previous experiments about surface reflectiveness affecting the size of elephant foot seem to be correct – with the shiny, nearly mirror-like surface I get much larger elephant foot. One disclaimer – I didn’t was the prints properly, so there is some excess resin (and yeah, I am aware of not having gloves, but small quantities of resin for short period of time does not trigger a reaction for me).The printer lowers the platform until a flag at the back of the threaded spindle interrupts a light barrier. This item will be shipped directly from the UK 3D Print Monkey warehouse and should arrive within 1-5 working days.