10 x Mini Micro JST 2.0 PH 3 Pin Male/Male with 150 mm Cable and Female

Product Information

This 12-inch (30-cm) cable has three 26 AWG wires with a 3-pin female JST PH-style connector that matches the connector on Sharp analog distance sensors that have 3 pins (see the sensors - opto section). By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. It is fitted with 145mm colour coded power leads and a JST connector at the end and features 2 x M3 mounting holes in the centre so it can be attached to the back of a BBC micro:. An adapter lead to allow single cell LiPo with 'UM' battery connector to be used on receivers with a JST-PH socket - e.

This ensures dependable continuity when used with low voltage, low current carrying circuits (dry circuits). New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging . This product series has some additional information related to it that you can download from the list below. LiPo cells with a UM connector are used on the earlier Parkzone, E-flite and Kyosho models and micro receivers such as the AR6400.A short adapter lead to allow 2S Lipos with the red JST 2 pin plug to be used with receivers or ESC that have a JST-PH 3 pin socket - e. At the same time, the insulation layer of the heat dissipation wire is not easy to fall off, which can well protect the JST plug connector. This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors.

We have switched to packaging that is either fully made from, or partially made from, recycled materials, which is helping to reduce our impact, and carbon footprint, on the environment.The 3 pin sockets are increasingly used on small 2S LiPo batteries for dual use as power and balance connector. This SM series wire to wire white Connector is made of tin plated phosphor bronze contact and are individually surrounded by housing walls having secured locking mechanism, . We also send out a weekly e-newsletter detailing any offers we have on, plus lots of product and other news. This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other.

The 3 pin is used on 2S LiPo to eliminate the need for separate discharge and charge/balance connectors. At Railwayscenics we do everything we can to make sure that the information included on our product pages is always as accurate as possible. PrinterMods is a proud cog in that machine - supplying the maker community with what they need to grow and thrive.Here at Railwayscenics we are committed to ensuring that you are fully protected and secure whilst viewing, and using the www. It features 145mm colour coded power leads terminated with a JST connector at the end and M3 mounting holes in the centre so it can be attached to the back of a micro:bit case. pin JST to Breadboard Jumper Cable is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. Neither solution is recommended, but they do work fine for non-critical applications where you only need to make up a few assemblies. Currently, malfunctions caused by poor connectors account for more than 37% of all equipment failures.