Brasso Metal Polish Wadding, 75g

Product Information

These wadding pads have been impregnated with cleaning fluid meaning there is no need to get an extra cloth dirty. Use small amounts of Brasso at a time, and add more product as you go– If you use too much Brasso you run the risk of it dripping everywhere as you use it, especially the liquid form, this is wasteful.

Continue to do this until the patch is clean – you might need to apply more pressure to certain grimey patches. To use Brasso Metal Polish Wadding remove the wadding and apply evenly to the desired metal surface in small circular motions Regularly wipe/buff the already treated surface with a new clean cloth to see how you’re polishing exercise is going. Below you’ll find steps on how to use Brasso in both liquid and wadding form. Skip to the section that applies to the Brasso you’ve bought. General tips to think about before you start using Brasso:

Keep an eye out for a blue and white striped pot that has a big red label on the front, with the name ‘Brasso’ on it.

It has been used to polish CDs, DVDs, screens, and pools to repair scratches. It is a mild solvent and an extremely fine abrasive, so when applied to the reflective surface of the disc and rubbed radially (in straight lines between the edge and centre), it can smooth scratches and reduce their effect. [8] [9] [10] Brasso Metal Polish Wadding has been in use for over a century - it has truly stood the test of time - and this product will continue to maintain the lustre of metal surfaces in the future. How To Use

Should You Wipe Brasso Off Surfaces After Cleaning?

If you wish to return this item to Robert Dyas, you can only do so by the following method: 1. Visit Your Local Robert Dyas Store