Liberon SDDO1L 1L Spirit Wood Dye - Dark Oak

Product Information

In this article, we’ll dive into the different types of stains and finishes, discuss the best ways to apply them, and cover other essential factors that make your final product stand out. When using a paint to colour wood, you risk hiding the natural grain. Whereas a wood stain is designed to completely soak into the wood, stain it to your chosen colour and bring out the beauty of the natural grain in the timber. The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) = 0.1% published by the European Traditional Oil-Based Stains: Oil-based stains have long been popular for achieving rich, deep colours on oak wood. These stains penetrate deep into the wood, enhancing its natural beauty while providing excellent durability. They are available in various colours, from light tones to dark shades. Further, pre-stain conditioners may be necessary for an even colouration, as oak tends to absorb stain unevenly due to its varying density.

Once you have chosen the perfect stain for your oak wood project, the next step is the application process. Here are some essential tips to ensure a flawless finish: Achieving stunning stains and finishes on oak wood is a journey that requires careful consideration and attention to detail. A Medium Oak Wood Stain is known to have a lighter natural brown undertone to it. Although we don’t have a Medium Oak Wood Stain in our range, we would recommend our Natural Oak Wood Stain as a great alternative. A highly concentrated wood stain that stains wood in one simple application. The formulation is water-based and so is safe to use in all environments, has a very low odour and is non-toxic. Our Wood Stains can be used on all different types of wood to stain them any colour. In this article we will look at our range of Oak Wood Stains and how you can use them to stain any wood to look like oak.Buy our Tester Kit that includes 9 colours of Wood Stain that we do(15ml Tester Pots in Slate, Warm Graphite or Grey are not included in the Tester Kit). Used Wood - If the wood is old, it may be painted or varnished. If so, remove any old coatings using a Paint & Varnish Remover first. These coatings will prevent the Wood Stain from soaking into the wood. If the wood has been treated with an oil or wax, wipe the surface down with thinners or mineral spirit to remove this. After removing the old finish, sand smooth with #100 Fine Sanding Pad. Whether making furniture, installing flooring, or building cabinetry, choosing the right stain and finish can bring out oak wood's natural beauty.

P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P271 Use only outdoors or in a well-ventilated area.P501 Dispose of contents/container to …A. If the surface is dirty clean it first with a suitable Wood Cleaner. Otherwise, sand it with #100 Sanding Pad in the direction of the grain. If the wood is freshly sawn, you may need to start with something more coarse such as 120g sandpaper and work your way up with the Sanding Pads. After staining the wood, it should be finished with a varnish, oil or wax. The Wood Stain is colourfast once dry but by applying a finish you can: