Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

Tiles Direct is your one-stop tiling shop, which means we won’t just help you find the perfect tile for your interior design project - we also have a raft of additional tiling accessories, including Mapei tile grout, to ensure you get a professional and long-lasting finish. Bonding special pieces of tiles. Kerapoxy CQ may also be used to grout unglazed klinker, stone, polished porcelain or porcelain in contrasting colours. Always apply a small sample of the product in a trial area before using Kerapoxy CQ on wider surfaces.

After laying any tiles, you’ll need to choose the right tile grout to help you complete the job and seal your tiles from dirt and moisture - and this is where we can help, too.Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. The colours available in this range are resistant to ultraviolet rays, too, so there’s also no concern about fading over time - and the Kerapoxy CQ also features coated quartz, making sure grout retains its original colour when cleaned.

Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Floors are ready for light foot traffic after approx. 3 hours. Surfaces grouted with Mapei Ultracolor Plus may be put into service after 24 hours. Basins and swimming pools may be filled up 48 hours after grouting. For interior and exterior wall and floor grouting of ceramic tiles, porcelain, terracotta, stone material, glass and marble mosaicsIf you don’t have a colour preference, or hadn’t realised there were numerous options to choose from, the Mapei grout colour chart below can help you to visualise the different shades before you buy. Ideal for grouting exterior façades, balconies, terraces, swimming pools, bathrooms and kitchens. Especially suitable for grouting floors of supermarkets, highway service stations, restaurants, airports and public service grounds. Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments.

Speaking of grout colours, you’ll find our Mapei grouts come in a vibrant array of colours, helping you to find an option that suits your tiling project. Whether you want to colour match or contrast your tile grout against your chosen tiles, you’ll be spoilt for choice. AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO , SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD AND TQ.

For Mapei, “zero impact on climate change” means that CO 2 emissions measured throughout the life cycle of ULTRACOLOR PLUS using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity. After the final cleaning operation, if the surface still has traces of Mapei Ultracolor Plus due to incorrect application, it may be cleaned down with an acidic cleaner (e.g. Keranet), by following the relevant instructions, at least 24 hours after grouting the joints. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material. Mapei are industry-leading tile grout manufacturers with a focus on delivering high-quality products that are also easy to use, even if you’re a novice tiler. With a diverse range of tile grout options available to buy online, we have everything you need to complete your tiling project and ensure you’re left with a professional-looking finish. Why use tile grout? Kerapoxy CQ does not guarantee perfect bonding if the edges of the tiles are wet or contaminated with cement, dust, oil, grease, etc. during grouting. Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth.

From our carrier you will receive a text message on the day of the delivery with a 2 hour delivery window. If there any changes or delays you will receive an update via text. Remove excess grout: with a dry sponge, wipe away any excess grout to make sure all the gaps are completely filled. Make sure you don’t scrub hard with the sponge though, as this could pull grout out of the grooves. Fixing your tiles in place is just one part of the tiling process. They also need a finishing sealing application to provide them with the best possible protection to ensure they stay in situ and look their best for longer. When resistance to acids or, where extreme cleanliness or sterile conditions are required, use a suitable acid-resistant epoxy grout.You must be available to accept delivery on the date you have requested, failure to do so will result in paying for a re delivery charge. Prep the area: first and foremost, make sure the adhesive has fully dried, then carefully carve out any excess adhesive, tile spacers, dust and other debris between the tile joints, using a vacuum at the final stage to remove as much as possible.