Cisco 1000BASE-SX SFP Module for Gigabit Ethernet Deployments, Hot Swappable, 5-Year Standard Warranty (GLC-SX-MMD) Silver

Product Information

The following table lists the supported hardware models and the default license levels they are delivered with. For information Bare opplært og kvalifisert personell skal foreta installasjoner, utskiftninger eller service på dette utstyret. This Cisco® GLC-SX-MMD compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. enhancements and bug fixes. A microcode upgrade occurs only during an image upgrade or downgrade, on PoE or UPoE switches.

Performance—Each switch member is able to handle 2000 connections per second (CPS) at less than 50% CPU utilization. Above this rate, AVC service is not guaranteed. The date the document that announces the end of sale and end of life of a product is distributed to the general public. and secure access to the system shell with mutual consent from the network administrator and Cisco TAC. or other OSPFv3 processes. Such a limit helps prevent the device from being flooded by too many redistributed routes. Enables you to configure a maximum number of prefixes (routes) that can be redistributed into OSPFv3 from other protocolsto assist Cisco TAC in advanced troubleshooting and are therefore not documented. For more information about CLI help, see

Kill Telemetry Subscription—Provides the ability to delete a dynamic model driven telemetry subscription using either: For information about the hardware including installation and technical specifications, see the Cisco Catalyst 9300 Series Switches Hardware Installation Guide. Ciso Catalyst 9300 Series Switches now support a new set of enterprise access models with fixed uplink ports. A mix of 1-Gigabit

Automated device provisioning: This is the ability to automate the process of upgrading software images and installing configuration files on Cisco Catalyst access points when they are being deployed in the network for the first time. Cisco provides turnkey solutions with Plug and Play (PnP) capabilities that enable an effortless and automated deployment. Since SCP and SSH operations are currently not supported on the hardware crypto engine, running encryption and decryption The following sample output displays the cleaning up of Cisco IOS XE Gibraltar 16.11.1 files using the install remove inactive command: Switch# install remove inactive Revision statements embedded in the YANG files indicate if there has been a model revision. The README.md file in the same GitHub location highlights changes that have been made in the release. Standby Monitoring of Cisco Catalyst 9800 Wireless Controllers in HA mode enables monitoring the health of the system on standby controller in an HA pair using programmatic interfaces (NETCONF/YANG, RESTCONF) and CLIs without going through the active controller. For more details refer technical documentation.

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Cisco Dense Wavelength-Division Multiplexing (DWDM) 10 Gigabit Ethernet SFP Modules: DWDM-SFP10G-XXXX The Cisco 1-Gbps SFPs are supported across a variety of Cisco networking equipment *. For more details, refer to the document SFP Compatibility Matrix at: https://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf Depending on the release you are upgrading from, microcode upgrade can occur during the install operation or during bootup: Configure and monitor Cisco TrustSec—Helps build secure networks by establishing domains of trusted network devices. EachThe following sample output displays installation of the Cisco IOS XE Gibraltar 16.11.1 software image to flash, by using the install add file activate commit command, for upgrade scenario Cisco IOS XE Everest 16.6.3 to Cisco IOS XE Gibraltar 16.11.1: Switch# install add file flash:cat9k_iosxe.16.11.01.SPA.bin activate commit The Cisco Catalyst 9800 Series opens a completely new paradigm in network configuration, operation, and monitoring through network automation. Cisco’s automation solution is open, standards based, and extensible across the entire lifecycle of a network device. The various mechanisms that bring about network automation are outlined below, based on the device lifecycle. The GLC-BX-D and GLC-BX-U SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 multisource agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. with improved network capacity management, faster troubleshooting, and lower operating costs. Also, Network-Based Application Description: Cisco 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength, 550m, extended operating temperature range and DOM support, dual LC/PC connector

Hidden commands have always been present in Cisco IOS XE, but were not equipped with CLI help. This means that entering enter Cisco 1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength, extended operating temperature range. To run the test, enter the test cable-diagnostics tdr command in privileged EXEC mode; to display test results, enter the show cable-diagnostics tdr command in privileged EXEC mode. WebUI: WebUI is an embedded GUI-based device-management tool that enables provisioning of the device, simplifying device deployment and manageability and enhancing the user experience. WebUI comes with the default image. There is no need to enable anything or install any license on the device. You can use WebUI to build a day-1 configuration and from then on monitor and troubleshoot the device without having to know how to use the CLI.For information about the module, see the Cisco SFP Modules for Gigabit Ethernet Applications Data Sheet. For information about device compatibility, see the Transceiver Module Group (TMG) Compatibility Matrix. Extended warranty (option): Available under a Cisco SMARTnet ® Service support contract for the Ciscoswitch or router chassis Reference links to information about key environmental sustainability topics (mentioned in the “Environment Sustainability” section of the CSR Report) are provided in the following table: Cisco 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength, extended operating temperature range.