Measuring Tape Clip, Precision Tape Measure Aid Measuring Tool, Fits onto Most Tape Measures (Without Ruler)

Product Information

The hook, located at the end of the tape comes in handy when measuring hard surfaces such as tables. You may notice that the hook is loose; this is intentional to ensure accuracy. If the hook has a hole in it, this is so it can grip onto screws. Belt Clip For example, if you want to find ⅝" on this tape measure, imagine that the inch is divided up into eight equal sections. ½" is 4/8", so look for the next ⅛" mark and you've found ⅝"! He adds, "For most people, a 25-foot option is great because it’s easy to store and long enough to handle most measuring tasks around the house. But if your space is small, a 16-foot tape measure is sufficient for most projects you’d need it for.”

It also helps to roll the tape so that the side you're measuring on is flat against the board. Place the tip of your pencil on the tape at your measurement, then slide it off onto the workpiece for the best results. Burn an inch The case is used to protect the tape, which makes the tape strong and long-lasting for use. Metal makes the most long-lasting designs, while plastic is more cost-effective. 2. Case Length Most commonly, tape measures have numerals for inches and feet, and small lines to indicate fractions of inches. There are some, however, including the Milwaukee Compact Tape Measure, that actually indicate the fractions with numerals rather than lines, which can be much easier to read. Sewing tape measures are flexible tapes that don’t have a case. These are very useful tools for sewing and similar projects but are also handy for taking body measurements, measuring items with curved surfaces, or general measuring tasks around the home. The most common length for a sewing tape measure is 5 feet, but there are some as long as 12 feet. Also, be careful not to let your fingers get close to the edges of the tape as it is retracting. The edges are not super sharp, but enough that they can leave a cut! How to Use the Nail NotchIf your tape measure if for simple measurements around the home e.g. to measure furniture, a tape measure with a plastic case will suffice. Our top choice for measuring tape for domestic use is the Irwin 10507788. Our testers then evaluated every tape measure for standout, which is the distance the unsupported, extended blade of the tool can remain rigid before bending towards the floor. Each tape measure was extended to its full length while the tester held it at various angles and noted the point at which the tape measure could no longer remain straight.

Here's an easy to read diagram that shows the tape measure fractions. You can see that in comparison, millimeters and the metric system are a lot easier to understand! On the bottom part, the smallest division reading that can be written is 1 mm, while the largest division reading that can be written on the tape is 1 m. Steps to Measure Using a Measuring Tape There are so many types of tape measure available on the market today, so which should you choose for the job? The hole may be for display, but the hook slot serves a practical purpose. It is made to hook onto a nail or screw, which is useful for construction projects. 7. Belt Clip With a rubbery outermolding, this tape measure is easy to grip and resistant to damage if dropped, although it might be a bit large for those with small hands. We tested both the 16-foot and 25-foot models and found this tape measure to be very easy to read, with big, bold markings on both sides of the blade. Measurements are indicated down to 1/16ths of an inch, with additional markings to show stud and joist spacings. The entire length of the 1-1/4-inch-wide blade is coated for sturdiness, but the first 6 inches have an additional rip-shield coating to ward off kinks or damage. The standout of the 16-foot version was around 12 feet and the 25-foot model was only slightly longer at around 13 feet in our tests.The measuring tape, often known as the blade, is used to get a measurement. The top row of most tapes is made up of imperial units (inches), while the bottom row is made up of metric units (centimeters). 5. Hook If squinting at the tiny measurement markings on a tape measure isn't your favorite part of using these tools, then you'll appreciate the clearly marked fractions on this tape measure, which are actual numerals, not just lines, indicating 1/8, 1/4, and 1/2 inches. You'll still need to count line markings for 1/16s of an inch, however. We tested both the 16-foot and 25-foot models and found them to be very accurate, comfortable to hold, and quite easy to read. The 1-inch-wide blade is coated with nylon for durability, and the case of the tape measure is very sturdy, with a rubbery coating for easy grip and added protection against damage from drops. The largest lines are the inches, and halfway between the inches is the ½" line. Halfway between the ½" on either side is the ¼", and you can divide that measurement again to find the ⅛" marks. Even smaller are the 1/16" and 1/32", but I usually just start counting individual lines if I need one of those! A measuring tape also known as a tape measure is a versatile tool used to measure length. The tape is manufactured with fiberglass, cotton, plastic, and metal ribbon or strip material.