Unicorn Spit Gel Stain and Glaze in One, 4 Ounce each - 10 Paint Collection

Product Information

Use Unicorn SPiT as a tinting agent to add brilliant color (or Unicorn SPiT SPARKLiNG for color AND sparkle) to epoxy projects. Famowood Glaze Coat High Gloss Finish or Famowood Glaze Coat High Gloss CRAFT Resin is recommended. For all other brands, test before use. Seal with FAMOWOOD GLAZE COAT or most any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High gloss sealers will help achieve a three dimensional look. Michelle found that people of all ages benefitted from playing with the yet unnamed product. From Michelle’s oldest son John, who has ADHD, to her friend's son Joe, with autism, men and women with dementia and alzheimers to an 80+ year old man whose hands didn’t work - everyone’s light came on. What a happy little miracle! Michelle’s heart and passion to see that look on peoples face became front and center. A lot of people ask this because they don't like the way Oil sealers yellow the look. Oil sealer is recommend . Epoxy (which is a learning curve in itself) Can also be used. I can tell you in my practice sessions I have sprayed 3 coats of clear spray paint on top (most brands work) and then after complete drying applied 2 coats of water based sealer and I was good to go.

LAMINATE OR OTHER NON-POROUS SURFACES (THAT CAN BE SANDED): Sand the surface with 220 grit sand paper after cleaning, then dust well before applying. There’s another benefit with Unicorn Spit. The paints come scented with the sweet smell of Jasmine. The sparkle also is scented with Lemongrass. Unicorn Spit typically takes 24-48 hours to dry. However, depending on the temperature, humidity, and airflow in your home, it may take up to 72 hours for Unicorn Spit to fully cure. If you’re in a hurry, you can speed up the drying process using a hairdryer on the low setting. How Do You Prepare Wood for Unicorn Spit?Allow the Unicorn Spit to dry completely before sealing with a topcoat. This will help protect the stain and ensure that it lasts many years. Do You Need to Seal Unicorn Spit?

Dilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn SPiT in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved. Non-water-based fabric protectant: Let Unicorn SPiT dry. Apply protectant. Allow to dry as indicated on the product. Let set for 24 hours before washing.After you’ve applied the sealer, let your project cure for 24 hours before using it or putting it on display. This will give the sealer time to set and dry thoroughly. Otherwise, you risk damaging the finish. With 14 colours to choose from, there are so many options to create the colours that please you. There’s also a further six sparkling colours so the possibilities are endless.

A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. Measure and mix Famowood Glaze Coat High Gloss Finish or Famowood Glaze Coat High Gloss CRAFT Resin as directed. You can water down Unicorn Spit as a stain or dye due to its high pigment content there is no loss of colour. It can also be airbrushed. E6000 Fabri-Fuse: Mix 1 part Unicorn SPiT with 3-7 parts E6000 Fabri-Fuse. Dry flat for 5 hours. Washable after 72 hours. *This WILL change the texture, durability and feel of the fabric.Vinegar: Put fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix. Let set in vinegar for 24 hours. Rinse with cold water and a very small amount of laundry detergent immediately after removing from the water/vinegar solution. Lay flat to dry. From a fun arts and crafts project to a real life business that employees 7 people full time, Unicorn SPiT has become a family of loving, caring people who all have a like mind and love to help others. The mission for the company remains the same and that is hope, creativity, and healing.