Aico EI1529RC Hardwired Smoke Alarm Remote Test, Hush & Locate Switch , White

Product Information

Test Pressing the Test switch into the on position will test all the alarms in the system. This operation is equivalent to pressing the Test button on all alarms in the system simultaneously and as such performs a true functional test of the system without having to reach up to each alarm in turn. Pressing the Test switch overrides the Location function and resets the system to standby. If you have a fire alarm system comprised of three or more interconnected smoke/heat alarms, it can be useful to keep a remote test and hush switch to hand. The Aico Ei1529RC is designed specifically for use with the Aico Ei160 series of smoke and heat alarms: the Ei161RC ionisation detector, Ei164RC heat detector and the Ei166RC optical detector.

Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive) Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives The EI1529RC from Aico is a mains, 230V, powered remote control switch for use with their 2100 and 160RC series of smoke and heat alarms and with the 260 series of carbon monoxide alarms.Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms Up to 4 x EI1529RC switches may be installed together with a maximum of 20 x 2100, 160RC and 260 Series smoke, heat or carbon monoxide alarms

The wall mounted switch unit can locate the initial source of an alarm, silence any false alarms and test all the alarms in the system. The control unit is mains powered and interlinks via hardwire connection with the majority of Ei Electronics and Aico products, including carbon monoxide alarms. These switches are highly recommended for systems with a mixture of smoke, heat, and carbon monoxide alarms so that occupants can identify the source of the alarm and take the appropriate action depending on the type of emergency.It increases the flexibility and user friendliness of the alarms by allows the user to remotely ‘Locate, Hugh and Test’ the alarms in the system: Easy to install using a 3 wire connection (Live, Neutral and Interconnect/Control) as standard smoke/heat alarm wiring The unit has three switches marked Locate, Test and Silence to control the features described above Test Switch: Allows the user to test all the interconnected Alarms at once from a convenient point rather than having to press the test button on each Alarm. The Ei1529RC is a wall mounted Remote Control device powered by 230V AC. It is recommended for use in systems comprising of three or more hardwired interconnected mains Alarms.