Screw Set Mounting Kitchen Tap Concealed Bathroom Fitting M6 70 mm (FW002)

Product Information

Head Type: Choose the head type that best suits your installation method and aesthetic preferences. The biggest problem with simple hand-tapping is accurately aligning the tap with the hole so that they are coaxial—in other words, going in straight instead of on an angle. The operator must get this alignment close to ideal to produce good threads and not break the tap. The deeper the thread depth, the more pronounced the effect of the angular error. With a depth of 1 or 2 diameters, it matters little. With depths beyond 2 diameters, the error becomes too pronounced to ignore. Another fact about alignment is that the first thread cut or two establishes the direction that the rest of the threads will follow. You can't correct the angle after the first thread or two. Material: Ensure the screws are made of a corrosion-resistant material such as stainless steel or coated steel, especially for outdoor or wet environments. From frame fixing screws to self-tapping screws, BES has all the screws you need. Some of the most popular product types within this range would include: Self-tapping screws have a wide range of tip and thread patterns, and are available with almost any possible screw head design. Common features are the screw thread covering the whole length of the screw from tip to head and a pronounced thread hard enough for the intended substrate, often case-hardened. [1]

An average screw can hold around 35- 45kg. Although, many factors including the type, weight, length and material of the screw, as well as how it was inserted, the types of forces acting on it and the angle it sits at can affect the amount of weight it will be able to hold. Will self tapping screws go through stainless steel? Plastics Design Library. Handbook of Plastics Joining: A Practical Guide. Cambridge University Press. p.107.

"Our aerator nozzles are universal and will fit all makes of tap"

When choosing the thread, consider the density of the wood. It’s best to use fine threads for hardwoods and coarse threads for softwoods. Metalworking taps and dies were often made by their users during the 18th and 19th centuries (especially if the user was skilled in tool making), using such tools as lathes and files for the shaping, and the smithy for hardening and tempering. Thus builders of, for example, locomotives, firearms, or textile machinery were likely to make their own taps and dies. During the 19th century the machining industries evolved greatly, and the practice of buying taps and dies from suppliers specializing in them gradually supplanted most such in-house work. Joseph Clement was one such early vendor of taps and dies, starting in 1828. [1] With the introduction of more advanced milling practice in the 1860s and 1870s, tasks such as cutting a tap's flutes with a hand file became a thing of the past. In the early 20th century, thread-grinding practice went through significant evolution, further advancing the state of the art (and applied science) of cutting screw threads, including those of taps and dies. To use self-tapping screws, place the screw directly on the aluminium sheet. The screw's sharp point will make its own hole. Stabilise the screw so it doesn't tilt as it is put in. Let the screw turn until it goes through. Take care not to over-tighten the screw as this can damage the metal or break the screw.

Hand-tapper: A simple fixture analogous to an arbor press in its basic shape. Its spindle is thus held accurately perpendicular to the work. Standard taps are held in the spindle, and the operator turns the spindle manually via a handlebar. This fixture obviates the need for the operator to carefully and skillfully approximate perpendicularity, which even for a skilled operator can easily result in a 2–5° error. Masonry screws (also called concrete screws) are self-tapping screws that are perfect for fixing materials directly into stone, masonry, and concrete without needing wall plugs. They have deep, wide threads, ensuring a secure fit once installed. Often used to fix timber, uPVC frames, pipes, and cable housing into masonry. The type of screw heads available for masonry screws include countersunk, double self-countersunk, flange, flat, pan, raised, and wafer. A hole often needs to be drilled into the material first. Then, the screw cuts a thread into the sides of the hole as you screw it in. Wear Safety Gear - Put on safety glasses and a dust mask to protect against dust and debris during drilling.Self drilling screws, also called Teks®, have a tip that resembles a drill, and often have spaced threads, like sheet metal screws. In a single time-saving operation, these screws drill, tap and fasten. Do not use self drilling screws in blind holes (holes that do not pass through the material). Also, the drill point must drill completely through the material before the first thread begins to thread into the material. That ensures proper fastening because the material will be fully engaged by threads. Drill chips are created that affect electrical and mechanical equipment. Four different point styles—#2, #3, #4 and #5—are available. Generally speaking, a #2 point is used with light gauge materials, #3 for medium gauge, and #4 and #5 points with heavy gauge materials. Length compensation: built in length compensation takes care of small push or pull to the spindle or feed difference.