Joined in 2023 
82 
63 About this deal
As with Sigmacover 400, the aggregate can be added to the paint or hand cast over the applied coating. Centrecoat Anti Slip Additive for Paint can also be added to Rustoleum Supergrip 7100 NS (which we discussed earlier), to add additional grip. What If Paint Is Not An Option? Bare Concrete– remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Remove Etch & Clean by thoroughly rinsing with clean water and allow surface to dry. If residual damp remains this is acceptable since Safety Coat is breathable. Although Protecta-kote Rubber Anti Slip paint is suitable for exterior use, depending on the conditions, you may want to consider Protecta-kote Rubber Anti Slip UVR. With all the benefits of regular Protecta-kote, the UVR version provides an improved weatherproof finish, protecting against heat and salt water. This makes it the ideal Anti Slip Yellow Paint for use on boats, emergency exits external metal steps, and even helicopter pads! So if you work in emergency services or just have your own private helicopter (we can all dream!) then the UVR version could be just the thing you need. As an added extra Protecta-kote UVR is available in a range of 11 different colours – including anti slip yellow! This is an ideal safety paint for steps. Can You Turn A Standard Floor Paint Into An Anti Slip Version?
We hope this article has helped to explain some of the yellow safety paint options available when looking for Anti Slip options.If the paint is to be applied to coated floors (e.g. epoxy floors), we recommend you carry out a compatibility test to determine drying time and adhesion of the paint.
Metal – remove any dust and flaking material by disc grinding or wire brushing. Apply the coating immediately after preparation to the clean metal surface. Grease or oil can be removed using Watco Bio D. Allow the metal to dry before coating. New Concrete– as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Cleanand thoroughly rinsed away and left to dry prior to applying this coating. Here we are in the middle of another heatwave in the UK, and frosty days and nights are probably the last thing on your mind! But as we know, the Summers do not tend to last that long here. It won’t be long before the heating’s on again and everyone’s thinking about Christmas (too soon to mention it?!). With this in mind, now is a good time to plan ahead with anti slip yellow paint. Powerfloated or very smooth surfaces– Watco Powerfloat Primershould be used on very smooth or power floated surfaces.Bare concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry. These durable coatings can provide an aesthetically rich finish, as well as meeting health and safety requirements, in a wide collection of colours for improved visibility for:
Great Deal 
New Comment