Araldite® Rapid 15ml x 2 Tubes Epoxy

Product Information

Araldite Adhesive of Choice". EPPM Magazine. 5 (3). April 2003. Archived from the original on 2008-01-13.

The Araldite Standard Tubes is a strong, two-part general purpose adhesive, which provides a long-lasting bond for almost any material. It is ideal for projects like complicated, heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30°C to 80°C). Oil, chemical and impact resistant. Highmark Manufacturing uses Araldite epoxy resin in the manufacture of advanced ballistic protection body armour. [6] Reaction mass of 2,2'-[methylenebis(2,1-phenyleneoxymethylene)]bis(oxirane) and 2,2'[methylenebis(4,1-phenyleneoxymethylene)]bis(oxirane) and 2-({2-[4-(oxiran-2 ylmethoxy)benzyl]phenoxy}methyl)oxirane. The use of Araldite adhesive in architecture to bond thin joints of pre-cast concrete units was pioneered by Ove Arup in Coventry cathedral and the Sydney Opera House. [4] At Coventry cathedral, Araldite adhesive was used to bond its columns and fins, while at Sydney Opera House, Araldite adhesive was used to bond the rib sections of the shells, since a traditional concrete joint would have slowed construction, as it would need 24 hours to cure before stressing. [5]Bonds most types of metal including steel, galvanised steel, cast iron, aluminium, iron, copper and brass. Will also bond non-metallic materials, such as ceramic, wood and glass. H315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H411 Toxic to aquatic life with long lasting effects. It is claimed that after curing the bond is impervious to boiling water and to all common organic solvents. Epoxy Chemistry - Understanding WEST SYSTEM Marine-Grade Epoxy". WEST SYSTEM . Retrieved 2021-03-19. Armour uses Araldite". The Engineer Online. 15 January 2000. Archived from the original on 12 September 2012.

Dispense equal parts of both liquids onto a clean disposable surface and mix both parts together thoroughly. Leave for 5-10 minutes and mix again before applying. The mixed glue will remain usable for 1 hours at 20°C. Seymour, Raymond B. (April 1981). "History of the Development and Growth of Thermosetting Polymers". Journal of Macromolecular Science, Part A. 15 (6): 1165–1171. doi: 10.1080/00222338108066459.Schlösser Metallbau, a manufacturer of metal parts for railway carriages, uses Araldite epoxy resin to bond aluminium profiles of cab doorframes on the DBAG Class 423 Siemens Bombardier train. [7] Araldite adhesive sets by the interaction of an epoxy resin with a hardener. Mixing an epoxy resin and hardener together starts a chemical reaction that produces heat - an exothermic reaction. [2] To extend product life replace caps immediately after use. Ensure you wipe excess from nozzle with a tissue dipped in acetone (or nail polish remover) before replacing cap.