Joined in 2023 
82 
63 About this deal
It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Raspberry Pi Zero 2 / Zero W / Zero WH. Connection Notes USB Network Gate: Windows, Linux, or Mac host device. Most powerful, setup isn't complicated. Made by same developer as FlexiHub, so you can use the FlexiHub interface on top of this. Secure with 256-bit encryption.
Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. Windows® 7, Windows 8.1, Windows 10, Windows Server® 2012 R2, Windows Server 2016, Windows Server 2019 and Linux Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD. Essentially, it's a tiny, super-fast connector that many of the best laptops today have a connector for, with the only downside being that USB A or USB B connectors can't be used with a USB Type-C port (that's where a USB Type-C hub comes in handy).Sabrent's HB-U3CR looks like it was built for MacBooks, thanks to a gunmetal gray aluminum chassis and a stylish, slanted design that will prop it up at an insertion-friendly angle on any table. However, it's an equally strong choice for use with a PC laptop that has USB-C ports and needs a few USB Type-A connections. We also did power testing on every powered USB hub. To see just how much electricity the ports could deliver, we connected a MakerHawk Electronic Load Tester to the hub and tried to dial up as many amps as we could. As we dial up amps on any device, the voltage drops, so a 5 volt USB port could drop down to 4 volts or less as we increase the load, but USB devices need close to 5 volts – 4.7 or 4.8 volts is usually enough – so we tested how many amps we could get at 4.8 volts and at the, likely unacceptable, rate of 4.05 volts.
This beast is almost 9 inches long and weighs 1.8 pounds. Every port has a power switch and a bright blue LED indicator. You can turn ports on and off individually, and the light will tell you what’s powered and in use. It’s plug-and-play compatible with PC, Mac, and Linux systems. It has a built-in surge protector to keep all your devices and the hub safe and secure from electrical failures. Ethernet, SFP+, 8x USB, power, fan, user, 2x WWAN (if CORE module is inserted), Wi-Fi (on Wi-Fi models) It has a power adapter and a dedicated power supply, which makes sense considering it’s so large. It should be noted that both the power and main USB cable must be connected for it to work. The chassis is plastic, so no premium materials were used here, but it’s so big it’s hard to imagine anyone breaking this thing without some serious force. It’s about the size of your average surge protector and measures 7.9 x 2.4 x 0.9 inches. Both USB-C and Thunderbolt use the same USB-C connection. The difference is that a “generic” USB-C connection typically provides 10Gbps of bandwidth, and Thunderbolt provides 40Gbps, with a road to 120Gbps with 2024’s Thunderbolt 5.
Are USB Splitters and USB Hubs the same?
We also like the choice of cables, with a short, pull-out cable that stows inside the case for travel, plus a longer desktop cable for when you need to stretch a little further. It gives this unit a little more flexibility than other USB-C hubs.
Related:
Great Deal 
New Comment