Zinsser Perma White Self-Priming Interior Paint Matt White 2.5L

Product Information

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc.

This is a common problem. It is likely the paint used previously is allowing moisture through to the plaster walls and ceiling causing the flaking, i.e. loss of adhesion. During winter the plaster has been absorbing moisture leading to the flaking problem. The ceiling will need to completely dry out before any painting is carried out. Leaving windows and the bathroom door open as much as possible, minimising use of the shower etc will help speed up the drying out process. Finally apply 2 coats of Zinsser Perma-White Interior Satin. This is a great product for bathrooms and areas of high humidity. It can also be mixed to a wide range of colours. To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. Zinsser Perma-White Interior Matt Paint–is ideal for areas where a low sheen finish is desired. As a durable paint with a long lasting protection against mildew and mould, this matt finish will be ideal for basements and kitchens. Satin: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.12% by weight.

2.5 Litre Tinted Colour

PermaWhite® Interior Satin - A scrubbable, satin finish recommended for high-humidity areas that are subject to challenging wear and tear. Ideal for bathrooms and laundry rooms.

Zinsser Perma White Mould Resisting Paint is formulated to resist mould and mildew for up to seven years Zinsser Perma-White Interior Satin Paint – if you are after a glossier finish rather than a dull sheen, Perma-White Satin Interior Paint will be the best choice. We recommend using this particular finish for areas that are subject to wear and tear. Due to its moisture resistant properties, Perma-White Satin Paint will be ideal for bathrooms and laundry rooms. P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P280 Wear protective gloves/protective clothing/eye protection/face protection.P273 Avoid release to the environment.P302 + P352 IF ON SKIN: Wash with plenty of water/…P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P501 Dispose of contents/container to … Numerous firsts in the industry were introduced by Zinsser, including Zinsser Perma-White®, the first mould- and damp-proof paint, Bulls Eye® 1-2-3, the first water-based universal primer, and Zinsser B-I-N®, the first shellac-based primer-sealer. A water-based primer that delivers performance previously only seen in solvent-based primers, Bulls-Eye 123 Plus was also introduced by Zinsser, demonstrating their continued commitment to innovation. Further safety information can be found in the safety data sheets available in the attachements section above.

Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone. When used in bathrooms, allow 24 hours to fully dry before subjecting surfaces to steam and moisture

Self-priming - adheres to glossy surfaces without sanding. Porous surfaces, such as bare plaster, must first be primed to satisfy their porosity (i.e. with Zinsser Bulls Eye 123). Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 0.092% by weight. LESS If the surface is not clean or has wax (candles burning) and plug in deodorizes, hairspray (bathrooms) bugspray/any sprays, dirt, oil/ grease( kitchens) and body oils from hands etc.. then paint will“fisheye” and Bubble.. This is the only negative though. This paint is a dream to apply, and the finish is outstanding, particularly in white. You’ll also find the adhesion and durability of Zinsser Perma White second to none. So much so, you can use it on internal woodwork.Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations

Apply evenly and consistently, using a good quality synthetic bristle brush, microfibre roller, applicator pad or spray gun (Use tip size 0.017 at pressure 2000 - 2600 psi) Surfaces must be clean, sound and free of dirt, dust, grease, wax, wallcovering adhesive, soap film, loose paint or other surface contamination. PaintWell increased its Industrial Paints offering with the acquisition of Promain UK Limited, the preferred UK distributor for many of the world’s leading paint and surface coatings manufacturers. NOTE: Perma-White® is formulated with a mildewcide approved for paint use and does not contain mercury or lead compounds. dichloro-2-octyl-2H-isothiazol-3-one. Contains a biocidal substance. Contains Reaction mass of: 5-chloro-2-methyl4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no.Non-explosive in the presence of the following materials or conditions: open flames, sparks and static discharge and heat. No unusual hazard if involved in a fire. I’m58 and have been painting since i was 16 professionally; I’ve brushed, rolled and sprayed 1000’s of gallons of paint on every kind of structure and prep situation. I’m the best painter you will ever see because I’ve owned my own business since i was 18; and I’m head and shoulders above anyone in skill, speed, perfectionist applicator, and product knowledge. Zinsser Perma White Mould Resisting Paint, a water-based self-priming acrylic paint, is a speciality paint formulated to resist mould and mildew for up to years. It forms a finish that is unaffected by moisture that weakens ordinary paint films, causing blistering and peeling as well as unsightly mildew.