Joined in 2023 
82 
63 About this deal
HDMI: A hub can be very useful at a desk, especially if you want to hook your computer up to an external monitor. We connected each of the hubs via HDMI to a Philips 272P7VUBNB/27 monitor with the resolution set to 4K, and we used the Blur Busters UFO Motion Test to confirm the refresh rate. Most hubs support only a 30 Hz refresh rate (the image refreshes 30 times a second) at 4K resolution, but a handful now support a smoother 60 Hz rate, and we prefer those hubs that do. In 2017, the organization rolled out a 20 Gbps speed for USB 3.x devices. In honor of the new speed, the version number changed for all speeds so the 5 Gbps speed became USB 3.2 Gen 1 and the 10 Gbps speed became USB 3.2 Gen 2 and the 20 Gbps speed became USB 3.2 Gen 2x2.
At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once. Some USB-C hubs go further by incorporating USB-PD passthrough. Here the idea isn’t so much to power the connected devices as to power the laptop the hub connects to, so that you just connect the laptop to the hub, and it charges as you use it without the charger taking up the spare USB-C port. The key thing here is how much power the hub can supply. Most will deliver 80W or more when used with a 100W charger, which should more than cover any laptop. However, with some you’re looking at 50W or less, which might mean missing out on fast-charging modes on some of those laptops that support them. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place. Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable.
System Requirements
This industrial-grade USB hub can extend your device's single USB port to four USB 3.2 ports and allows you to switch the USB devices between two host computers (e.g. Laptop and Raspberry Pi).
Any extra connectivity? Some USB-C hubs will come with HDMI out, allowing you to connect to a monitor, provided that your PC can output video from its Type-C port. Other hubs have microSD or SD card readers built-in. You can also get other versions of Inatek's USB hub, the HB2025 for example, that connect to your computer via USB-C, which is a more common interface for 10 Gbps connections, particularly on laptops. We really wish one of these hubs had a mix of USB-C and USB Type-A downstream ports, but they are all Type-A downstream.However, despite the USB-IF's desires, we still see most PC vendors listing their ports as USB 3.2 or USB 3.1, without necessarily telling you what to expect from them. The spec sheets may not even list a generation number, though if they don't, you should assume that it's Gen 1 (5 Gbps).
Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. In 2013, USB-IF announced that it was taking USB up to 10 Gbps and, in doing so, changed the version number for all USB 3.x products. So USB 3.0 (5 Gbps) became USB 3.1 Gen 1 and the new, 10 Gbps speed became USB 3.1 Gen 2. The USB 3.2 specification defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate. While USB hosts and devices were originally designed as single-lane solutions, USB Type-C ®cables were designed from the outset to support multi-lane operation to ensure a path for scalable performance. All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD.Defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate, without sacrificing cable length Finally, and perhaps most importantly, external SSDs and the best hard drives need at least USB 3.2 / 3.1 / 3.0 speeds. The fastest external SSDs or SSD enclosures can operate at USB 3.2 Gen 2 (10 Gbps) or USB 3.2 Gen 2x2 (20 Gbps), though the 10 Gbps speed is far more common and cheaper. Power pass-through: All the hubs we considered also have a USB-C port that allows you to plug in your charger without taking up a second port on the computer itself (if it even has a second port). USB-C supports power at up to 100 watts, while laptops take anywhere from 30 watts (for a small machine such as the MacBook Air) to 45 watts (for many midrange laptops, as Chromebooks tend to be) to 97 watts (for the 16-inch MacBook Pro). We’ve found the Power tab in macOS’s System Report to accurately report the wattage of the power source, and in our tests we compared the figures stated there against what each company advertised. There are still a couple of caveats here. First, your device needs to support a DisplayPort 1.4 video output over USB-C, which will count out many Chromebooks and some MacBooks and Windows laptops. Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. But if you’re happy to live with these compromises, this is one of the best USB-C hubs we’ve seen.
Great Deal 
New Comment