Broken key extractor set

Product Information

If the paperclip method above doesn't give you enough griping power and keeps sliding off the key, you may need to use something with a sharper tip. For this method, you'll need wire cutters and blades thin enough to fit between the broken piece of the key and the side of the keyway.

Broken key extractors come in different designs. Some have one hook while others have more, so you'll have to decide the most effective one to use for your situation. You should give it several tries since it might not work perfectly the first time. 4. Needle Nose Pliers NOTE: These numbers provide an average but you might have to wait longer. We think it's only fair that we warn you of this. If you have a broken key extractor kit then now is the time to use it. There is usually an assortment of long thin tools in this kit to use to slide down the side of the key to help to pull it out. For this, you’d need a drill. Simply plug the instrument into a power outlet, and start drilling through the keyhole.This method is a little more difficult, as you’d be required to have a tool called a broken key extractor to carry it out. Once the knife is in the keyway, apply leverage to the key. If your knife slips, try digging it into various other places on the key, including the bottom. Some extracting tools—such as HPC spiral blade key extractors—use a thin, flexible bar with a spiraled thread on it—similar to a screw.

When nothing else is working, a magnet can be used to remove metal from any surface. It is a useful tool in many different situations and it is always on hand.The metal used for most keys is relatively soft, and typically the tip of a sharp knife will pierce the side of the key well enough to leverage it out. There are two ways to use a paperclip to extract a broken key. In my experience, thinner paperclips tend to work better and give you a deeper grip on the key. Another tool you can use when your key breaks is a pair of needle-nose pliers. You should use this method, especially if your key broke, leaving only the bow in your hand. There should be part of the broken key protruding out of the keyhole for this method to succeed.

Tweezers are an excellent alternative for needle nose pliers, thanks to their more compact design. While needle nose pliers are relatively large, tweezers are much slimmer and can help you grab the key while it's further than pliers can reach. Unfortunately, tweezers aren't as sturdy as pliers, so they can easily slip off while you pull the key out. It’s also a good idea, before starting the extraction process, to apply some kind of lubricant to the keyhole such as WD-4O to help get the broken key out faster. 1. Tweezers Before proceeding, it is essential to note that removing a broken key can cause further problems if rushed or done incorrectly. So be cautious and gentle while attempting any of the methods below.This method works really well; however, it may take several attempts, so don't get discouraged and keep at it! 10. Superglue Select an extractor in your set once you have a good gauge of where the missing piece is lodged. Generally, the small hook type is the most common tool to use to search for nudges to hook a missing piece out. Don’t push it too far, just enough that the pressure is applied firmly, and pulling the key out becomes easy. For example, if you slip up while removing the key, you could accidentally push it further into the keyway—aggravating the problem.

There are many different types of key extractors, but each is typically used the same way. They dig something sharp into the broken piece of the key and give you the leverage to pull it out. Do not force the blade into the keyway. If it does not fit smoothly, make adjustments to the blade. It must be thin enough to fit in the keyhole and pass alongside the broken key fragment. 4. Super Glue Here is the breakdown of the inventory you’d need for all the ways mentioned in the article to work. The main challenge with graphite spray lubricant is that it can stain your surfaces. So, you'll want to ensure the nozzle is in the keyway before you spray the lubricant to avoid getting it all over the door. You should also have a rag or paper towel at hand to wipe off the excess lubricant that will spill from the keyway. However, to use this method, the key piece will need to be close to the edge of the keyway. If it is too far in, you won't be able to reach it.However, when doing so, be sure to pull it out slowly. The key could be snagged, which could be how it broke in the first place. Do not squeeze too hard on the tweezers. When the tweezers shut after gripping the key fragment, the fragment will be pushed further into the keyway. Each failed attempt to grip the key will make the key more difficult to remove. 2. Broken Key Extractor You know what they say, an ounce of prevention is better than a pound of cure. Now that you’ve learned your lesson, you might prepare yourself for the future, and prevent this again. In this guide, we'll cover 11 tried-and-true methods using various objects—many of which you likely have in your own home. Make sure that you have lined up the nozzle of the lubricant so that it is inside the keyway before you spray. You will also need a rag or paper towel to remove any of the excess lube that spills out of the keyway. Also, grab a pair of needle-nose pliers, because even though these methods will remove the broken key, pliers will help to get it out that much faster. Once enough of the key is accessible, you can just pull it free with your pliers. Materials That May Come In Handy