DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's

Product Information

Doing that’s is probably a bad idea anyway, because there are stories of interference on the step motor controllers when they 110v source shares the same conduit. We started by using the fixed base with a new 1/4-inch round-over bit to create a finished edge on a piece of 1×4 pine. There’s one key thing to note about Pro Tool Reviews: We’re all about the professional tool user and tradesman! The variable-speed control allowed for us to change the RPMs for maximum efficiency when making various cuts in different kinds of wood. There are many different batteries available so if you arent sure what you need then have a look at our Best Dewalt Battery page.

HP compact router, we used both the plunge base and the fixed base to make a variety of different cuts.

Cable management can be a little tricky on with the DeWalt DWP611 because the power cord is not going to fit into the drag chain. The consistent cutting speed is actually attributed (per DeWalt) to the built-in electronic motor speed controller that continually monitors the speed and makes micro adjustment to ensure that it is running at the setting you locked in. According to the data we’ve gathered, it’s the Makita RT0701C, with an RPM rating of up to 30,000 RPM. In fact, Inventables not ships the DWP611 as their standard spindle on all X-Carves due to the feedback from owners like us! To make sure the cuts are precise, there is a sliding steel bar that can be adjusted for making plunge cuts up to 2” deep by loosening the large thumb screw located next to it.

If the square one is at least 10" it'd likely work, but I'd much prefer a non square shape to allow for easier turning, or spinning, of the router when nearing clamps or other obstructions. A compact, or trim router is a rotating cutting tool with a flat base that accepts different sized and shaped bits to cut a specific pattern into wood.This means you can fit into the tight spaces, but it also means that you’re holding the body of the router itself. It has a number of really useful features including a soft start, led lighting for the work space, easy to use depth adjustments, and the two routers are easy to swap over, using the same base.