Innovative Marine Nuvo Fusion 15 AIO Cube Nano (All in One) Aquarium - Item# 0215-P

Product Information

The HEX wrench that is included is designed to tighten the included tension locks and you will also want a Phillips head screwdriver to secure the top of the stand. Remove the plastic protective coating from each panel and aluminum profile before assembling the tank; it's just way easier to do it first. doesn’t seem too bad for the sides of the coast to coast “infinity” overflow but I couldn’t fit my hand in there.

The last I read was that serial numbers lower than 400 were made from the thinner glass that has all the problems. minutes later I come back to find water all over my desk and pouring out of the back of the tank onto the carpet. A 40-gallon saltwater aquarium is a perfect size because it is not so big that it will break the bank and is manageable enough to fit into almost any home without having to break down walls or move furniture. The shallow but deep Lagoon series from Innovative Marine is an all in one tank design that does not need the use of a sump of complicated filtration.

I liked the simplicity of the design, which isn’t too dissimilar to the D-D 24: everything sits in compartments in the back of the tank and Innovative Marine make a good selection of components that fit the tank perfectly. Using the HEX wrench, turn the tension locks 180° to tighten them so that the DOT is in the center of the aluminum profile. Also any tank can fail so just because their company experienced problems isn't entirely their fault at all most if it was due to transportation methods, curved glass doesn't move well and this caused micro cracks to form. I quickly got help moving my two clownfish and various clean-up crew into a bowl and started siphoning out the water. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH).

Arag-Alive sands clear quickly and contain millions of live bacteria, speeding up your tanks cycle and leading to less nuisance algae.When I read your original post, I was having a not so good day and I should not have let that cause me to go off on you like I think i did. The tank would fit perfectly in the space I had allocated and despite not looking that much bigger in size, it’s almost twice the capacity of the nano it’s replaced. At least Ill be able to hold onto all of my aftermarket parts, and they will transfer over to the Fusion 20. Mountain Scapes, Frag Gardens and Mangrove Lagoons are now all possible in this shallow yet deep “plug and play” aquarium.

I am a beginner in the saltwater world, and previously ran a 30g freshwater tank with an angel and pleco. Maybe, I'll add some cheap koralia pumps on each side to keep things suspended and blackout the overflow top to avoid any algae growth. The newest innovation in the Prime line from AquaIllumination, the Prime 16 HD Series brings more power and color where you want it, plus the freedom to use your smartphone as a controller. Well this is why we use only the highest grade Polycarbonate material, gone are the days of warping and bowing! For my auto top-up requirements, I initially planned to use my old Tunze Osmolator, but after remembering a couple of problems last summer and the noisy pump, I decided to opt for a new Innovative Marine Hydrofill pump and controller system.marked the start of my fifth year of reefing (and my 30th year as a fishkeeper) – and what better way to get things rolling than upgrading from my old faithful D-D 24g nano to something a little bigger?

The lids have UV protected mesh which is secured using silicone bead which allows the mesh to be changed when needed. Once the slight eggy smell had gone, I ran a few water tests and everything seemed good, so I moved our two clownfish (Amphiprion ocellaris) over, followed by our yellow banded pygmy wrasse (Wetmorella nigropinnata) and flaming prawn goby (Discordipinna griessingeri).It is by far the most popular sand for its medium to large grain size, high amount of total available surface area, as well as just its overall beauty. The tank dimensions look great with 36 front to back, but i see the overflow section is extending across the entire back wall. Our Innovative Marine lids are created to sit 4mm inside your tank with an outter rim to sit directly on your tank glass which gives you a slimline look. A trip to IKEA for a small cupboard unit, a 12 litre cylindrical water storage tank from an online supplier and a few drilled holes later and I had a tidy top-up unit in place.